Data logger V1000+ supports up to 40 units (20 units per RS485 port)
Use shielded twisted pair wire (recommended Φ>1mm2)
The cable length between each inverter should be <200m
For better communication quality, the red dial switch in the inverter that is installed at the end of the circuit can be turned on while other inverters keep the switch state as “1”.
Data logger V1000+ supports up to 40 units (20 units per RS485 port)
Use shielded twisted pair wire (recommended Φ>1mm2)
The cable length between each inverter should be <200m
For better communication quality, the red dial switch in the inverter that is installed at the end of the circuit can be turned on while other inverters keep the switch state as “1”.
